Portable electromagnetic drill & tapping machine
(single-Phase)
AE-22S
Zoom in to see details
Product Features
- This model can use normal straight handle drill bit or oblique handle drill bit to drill holes. And use tap bit to tap thread.
- The drilling capacity is from 3mm-22mm and the tapping capacity is from 8mm-14mm.
- The up/down transmission of the tool bit is by the round shaft gear rack, so the drilled holes and the tapped threads won’t skew to one side. The processing quality is very good and the machine body is stable and durable too.
- The sleeve of the drill bit and the torsion fixture of the tap bit are all speedy connecter designed which can be exchanged quickly to increase working efficiency.
- Tapping adaptors with torsion control, tap bits are protected from being twisted off.
- It’s suitable for the drilling and tapping process on the objects which is difficulty in moving, like heavy machine, steam boiler and the building reinforcing beams.
Specifications 
| Model | AE-22S |
|---|---|
| Power(AC) | 110V |
| 220V | |
| Motor Rated Output | 1350W |
| 1350W | |
| Motor Rated Ampere | 12A |
| 6.5A | |
| R.P.M. | 380 730 |
| Drill Capacity | 1/8"~7/8" 3~22mm |
| Feeding Stroke | 100mm |
| Hole Capacity | - |
| Tapping Capacity | 5/16"~1/2" 8~14mm |
| Body Stroke | 100mm |
| Turning Degree | 180° |
| Transversal Move | 15mm |
| Magnetic | 180x105x70mm |
| Magnetic Force | 900kgs |
| Height | 470mm |
| Machine Weight | 28kgs |
Dear user:
If the slide plate of your existing machine is getting loose easily to cause the drilled hole and tapped thread skewed to one side without vertical, and the machine body is not durable either, please consider to use this machine to solve all the problems for you.
* These specifications and shape may be changed for improvement without prior notice.